FaxMan Jr
Modem Configuration Information

Modem Configuration Information

 

FaxMan Jr. uses a default modem initialization string that works with most fax modems.

In order for the FaxMan Jr. control to work correctly with the modem the modems needs to have

flow control enabled. The flow control can be set to hardware flow control, software flow

control or both. Certain modems, in particular some USR models, do not have flow control

enabled by default.

Some modems will need special initialization strings. Though these will not be appropriate for

every model under each listed manufacturer, here is a list of init strings that may be helpful: 

 

FaxMan Jr. Default Init String:

AT&FE0V1&C1&D2S0=0

 

Digi Acceleport:

AT&FE0V1&K6&C1&D2S0=0

 

US Robotics Sporsters:

AT&F1E0V1&C1&D2S0=0

alternate USR string to enable both hardware and software flow control.

AT&F1&H3&I2&R2E0V1&C1&D2S0=0

 

Practical Peripherals:

AT&FE0V1&C1&D2&K4S0=0

 

MultiTech:

AT&FE0V1&C1&D2&E5S0=0

or for both Hardware & Software flow control:

AT&FE0V1&C1&D2&E4&E11S0=0

 

Hayes:

AT&FE0V1&C1&D2/Q1S0=0

 

To set these initialization strings you can set the DeviceInit string for any of the com ports you need to modify this for.

See the DeviceInit property.

 

 


© 2014 Data Techniques, Inc. All Rights Reserved.

Send comments on this topic.